您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 3903.12-2005 鞋类 外底试验方法 撕裂强度

作者:标准资料网 时间:2024-05-10 07:13:33  浏览:8211   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:鞋类 外底试验方法 撕裂强度
英文名称:Footwear-Test methods for outsoles-Tear strength
中标分类: 轻工、文化与生活用品 >> 服装、鞋、帽与其他缝制品 >> 鞋、靴
ICS分类: 服装工业 >> 鞋袜
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2005-09-15
实施日期:2006-09-01
首发日期:2005-09-15
作废日期:1900-01-01
主管部门:中国石油和化学工业协会
提出单位:中国轻工业联合会提出
归口单位:全国制鞋标准化中心
起草单位:中国皮革和制鞋工业研究院
起草人:严怀道、戚晓霞
出版社:中国标准出版社
出版日期:2006-01-01
页数:16开, 页数:6, 字数:9千字
计划单号:20021676-T-607
书号:155066.1-26946
适用范围

GB/T 3903的本部分规定了鞋类外底材料使用裤状试样测定撕裂强度的方法。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过GB/T3903的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本凡是不注日期的引用文件,其最新版本适用于本部分。

所属分类: 轻工 文化与生活用品 服装 鞋 帽与其他缝制品 鞋 靴 服装工业 鞋袜
下载地址: 点击此处下载
Product Code:SAE J517
Title:Hydraulic Hose
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope:This SAE Standard provides general, dimensional and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment.The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document. (See Tables 1A and 1B).This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user.The maximum working pressure of a hose assembly comprising SAE J517 hose and hose connectors per SAE J516, J518, J1453, etc., shall not exceed the lower of the respective SAE maximum working pressure values.When using SAE J517 hose for marine applications, see SAE J1475, J1942 and J1942-1.The SAE J517 100R9, 100R10 and 100R11 hoses will be discontinued beginning with the year 2005, due to lack of demand.The SAE J517 100R1A, 100R2A, 100R2B and 100R2BT will be discontinued beginning with the year 2005 due to lack of demand. For DOD orders after 2004, use 100R1AT and 100R2AT to replace 100R1A and 100R2A.The SAE J517 100R2AT maximum working pressures will be replaced by the type S maximum working pressures beginning with the year 2006, eliminating the need to label 100R2 as type S.The SAE J517 100R16 maximum working pressures will be replaced by the type S maximum working pressures with the year 2008, eliminating the need to label 100R16 as type S.
基本信息
标准名称:冷冲模导正销 C型导正销
中标分类: 机械 >> 工艺装备 >> 模具
替代情况:调整为JB/T 7647.3-1994
发布日期:
实施日期:1984-01-01
首发日期:
作废日期:
出版日期:
页数:3页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 工艺装备 模具